Emergency Backup Battery EML-CTB-SP 12-7
Emergency Backup Battery EML-CTB-SP 12-7 features an automatic backup system with a maximum power output of 60W. It uses a 2-stage charging system to extend battery life. The unit is powered by a sealed maintenance-free battery, eliminating the need for distilled water refills throughout its service life
| Operating Condition | Provides emergency lighting only when the main power supply fails |
| Input Voltage | AC 220V 50Hz (household power supply) |
| Maximum Output Power | 60W |
| Battery | Sealed maintenance-free battery (no distilled water required) |
| Battery Capacity | 12V 7.5Ah |
| Operating Duration | 30W / 3 hours |
| Charging System | Two-level charging system: Level 1 – Charges battery up to 14.4V, then reduces to Level 2 – 13.75V to maintain stable battery voltage |
| Current Limiting | Limits charging current to 450mA |
| Charging Time | 12 – 18 hours |
| Enclosure Material | Made of 1.0 mm electro-galvanized steel sheet, coated with epoxy powder for rust protection |
| Protection System | AC fuse for input short-circuit protection, DC fuse for charging and load protection, and low voltage cut-off circuit to extend battery life |
| Status Indicators | LED MAIN – shows input power status, LED CHARGE – shows charging status, LED BATT. FULL – shows battery readiness |
| Switch Button | Manual On/Off button for emergency lamp operation only |
| Emergency Test | Test button for emergency lighting system |
| Weight | 4.2 kg |
Emergency Backup Battery EML-CTB-SP 12-5
Emergency Backup Battery EML-CTB-SP 12-5 features an automatic backup system with a maximum power output of 40W. It uses a 2-stage charging system to extend battery life. The unit is powered by a sealed maintenance-free battery, eliminating the need for distilled water refills throughout its service life
| Operating Condition | Provides emergency lighting only when the main power supply fails |
| Input Voltage | AC 220V 50Hz (household power supply) |
| Maximum Output Power | 40W |
| Battery | Sealed maintenance-free battery (no distilled water required) |
| Battery Capacity | 12V 5Ah |
| Operating Duration | 20W / 3 hours |
| Charging System | Two-level charging system: Level 1 – Charges battery up to 14.4V, then reduces to Level 2 – 13.75V to maintain stable battery voltage |
| Current Limiting | Limits charging current to 450mA |
| Charging Time | 12 – 18 hours |
| Enclosure Material | Made of 1.0 mm electro-galvanized steel sheet, coated with epoxy powder for rust protection |
| Protection System | AC fuse for input short-circuit protection, DC fuse for charging and load protection, and low voltage cut-off circuit to extend battery life |
| Status Indicators | LED MAIN – shows input power status, LED CHARGE – shows charging status, LED BATT. FULL – shows battery readiness |
| Switch Button | Manual On/Off button for emergency lamp operation only |
| Emergency Test | Test button for emergency lighting system |
| Weight | 3.7 kg |
product
Emergency Backup Battery
Battery EML-CTB-SP 12-7
Battery EML-CTB-SP 12-5
แบตเตอรี่สำรองไฟ EML-CTB-SP 12-7
แบตเตอรี่สำรองไฟ EML-CTB-SP 12-7 สำรองไฟอัตโนมัติ กำลังจ่ายไฟออกสูงสุด 60 วัตต์ ระบบชาร์จ แบบ 2 ระดับ เพื่อช่วยรักษาแบตเตอรี่ให้ใช้งานได้นานมากขึ้น เป็นแบตเตอรี่แห้ง ไม่ต้องเติมน้ำกลั่นตลอดอายุการใช้งาน
คุณสมบัติ แบตเตอรี่สำรองไฟ EML-CTB-SP 12-7
| สภาวะการทำงาน | จ่ายแสงสว่างฉุกเฉินเฉพาะในช่วงเวลาที่ไฟปกติดับ |
| แรงดันไฟฟ้าเข้า | ไฟกระแสสลับ 220 โวลต์ 50 เฮิร์ทซ์ (ไฟบ้าน) |
| กำลังจ่ายสูงสุด | 60 วัตต์ |
| แบตเตอรี่ | ชนิดแบตเตอรี่แห้ง ไม่ต้องเติมน้ำกลั่นตลอดอายุการใช้งาน |
| ขนาดแบตเตอรี่ | 12 โวลท์ 7.5 แอมป์ |
| ระยะเวลาการใช้งาน | 30 วัตต์/ 3 ชั่วโมง |
| ระบบการชาร์จไฟ | ระบบการชาร์จไฟแบบ 2 ระดับแรงดันในการชาจร์แบตเตอรี่ ระดับที่ 1 วงจรจะชาร์จแบตเตอรี่จนแรงดัน 14.4 โวลท์ จากนั้นแรงดันจะลดลงมาเป็น ระดับที่ 2 คือ 13.75 โวลท์ เพื่อรักษาแรงดันแบตเตอรี่ให้คงที่ |
| ระบบจำกัดกระแสไฟฟ้า | จำกัดกระไฟฟ้าที่ 450 มิลลิแอมป์ |
| ระยะเวลาในการชาร์จ | 12 ชั่วโมง ถึง 18 ชั่วโมง |
| วัสดุตัวถังโคมไฟฉุกเฉิน | ตัวกล่องทำจากแผ่นเหล็ก Electro galvanized หนา 1 มิลลิเมตร พ่นเคลือบด้วย Epoxy power coated ป้อมกันการเกิดสนิม |
| ระบบป้องกัน | ฟิวส์ AC ป้องกันการลัดวงจรด้านแรงดันไฟเข้า, ฟิวส์ DC ป้องการลัดวงจรด้านระบบชาร์จและการจ่ายโหลดและ วงจรป้องกันการใช้แบตเตอรี่จนหมด ( Low voltage cut off ) เพื่อให้อายุการใช้งานแบตเตอรี่ได้นานขึ้น |
| การแสดงสถานะ | LED MAIN แสดงสถานะแรงดันไฟเข้า LED CHARGE แสดงสถานะการชาร์จแบตเตอรี่ LED BATT.FULL แสดงสถานะแบตเตอรี่พร้อมใช้งาน |
| ปุ่มกดสวิตซ์ | ปุ่มกด เปิด/ปิด หลอดไฟ เฉพาะตอนติดฉุกเฉินเท่านั้น |
| การทดสอบเครื่องไฟฉุกเฉิน | ปุ่มกด สำหรับทดสอบเครื่องไฟฉุกเฉิน |
| น้ำหนัก | 4.2 กิโลกรัม |
แบตเตอรี่สำรองไฟ EML-CTB-SP 12-5
แบตเตอรี่สำรองไฟ EML-CTB-SP 12-5 สำรองไฟอัตโนมัติ กำลังจ่ายไฟออกสูงสุด 40 วัตต์ ระบบชาร์จ แบบ 2 ระดับ เพื่อช่วยรักษาแบตเตอรี่ให้ใช้งานได้นานมากขึ้น เป็นแบตเตอรี่แห้ง ไม่ต้องเติมน้ำกลั่นตลอดอายุการใช้งาน
คุณสมบัติ แบตเตอรี่สำรองไฟ EML-CTB-SP 12-5
| สภาวะการทำงาน | จ่ายแสงสว่างฉุกเฉินเฉพาะในช่วงเวลาที่ไฟปกติดับ |
| แรงดันไฟฟ้าเข้า | ไฟกระแสสลับ 220 โวลต์ 50 เฮิร์ทซ์ (ไฟบ้าน) |
| กำลังจ่ายสูงสุด | 40 วัตต์ |
| แบตเตอรี่ | ชนิดแบตเตอรี่แห้ง ไม่ต้องเติมน้ำกลั่นตลอดอายุการใช้งาน |
| ขนาดแบตเตอรี่ | 12 โวลท์ 5 แอมป์ |
| ระยะเวลาการใช้งาน | 20 วัตต์/ 3 ชั่วโมง |
| ระบบการชาร์จไฟ | ระบบการชาร์จไฟแบบ 2 ระดับแรงดันในการชาจร์แบตเตอรี่ ระดับที่ 1 วงจรจะชาร์จแบตเตอรี่จนแรงดัน 14.4 โวลท์ จากนั้นแรงดันจะลดลงมาเป็น ระดับที่ 2 คือ 13.75 โวลท์ เพื่อรักษาแรงดันแบตเตอรี่ให้คงที่ |
| ระบบจำกัดกระแสไฟฟ้า | จำกัดกระไฟฟ้าที่ 450 มิลลิแอมป์ |
| ระยะเวลาในการชาร์จ | 12 ชั่วโมง ถึง 18 ชั่วโมง |
| วัสดุตัวถังโคมไฟฉุกเฉิน | ตัวกล่องทำจากแผ่นเหล็ก Electro galvanized หนา 1 มิลลิเมตร พ่นเคลือบด้วย Epoxy power coated ป้อมกันการเกิดสนิม |
| ระบบป้องกัน | ฟิวส์ AC ป้องกันการลัดวงจรด้านแรงดันไฟเข้า, ฟิวส์ DC ป้องการลัดวงจรด้านระบบชาร์จและการจ่ายโหลดและ วงจรป้องกันการใช้แบตเตอรี่จนหมด ( Low voltage cut off ) เพื่อให้อายุการใช้งานแบตเตอรี่ได้นานขึ้น |
| การแสดงสถานะ | LED MAIN แสดงสถานะแรงดันไฟเข้า LED CHARGE แสดงสถานะการชาร์จแบตเตอรี่ LED BATT.FULL แสดงสถานะแบตเตอรี่พร้อมใช้งาน |
| ปุ่มกดสวิตซ์ | ปุ่มกด เปิด/ปิด หลอดไฟ เฉพาะตอนติดฉุกเฉินเท่านั้น |
| การทดสอบเครื่องไฟฉุกเฉิน | ปุ่มกด สำหรับทดสอบเครื่องไฟฉุกเฉิน |
| น้ำหนัก | 3.7 กิโลกรัม |