Emergency Light (EML-SP 12-7)
Emergency Light EML-SP 12-7 features an automatic backup system that activates instantly during a power outage. The emergency light provides consistent illumination without dimming for up to 7 hours of operation. Equipped with energy-efficient LED bulbs, it uses a 2-stage charging system to extend battery life. The unit is powered by a sealed maintenance-free battery, eliminating the need for distilled water refills throughout its service life
Key Features – Emergency Light EML-SP 12-7
| Operating Condition | Provides emergency lighting only when the main power supply fails |
| Input Voltage | AC 220V 50Hz (standard household power) |
| Lamp | 2 × LED lamps, 7W each (constant brightness) |
| Battery | Sealed maintenance-free battery (no distilled water required) |
| Battery Capacity | 12V 7.5Ah |
| Operating Duration | 5 hours within the first 12 months, and 2 hours within 2 years |
| Charging System | Two-level charging system: Level 1 – Charges battery up to 14.4V, then reduces to Level 2 – 13.75V to maintain stable battery voltage |
| Current Limiting | Limits charging current to 450mA |
| Charging Time | 12 – 18 hours |
| Enclosure Material | Made of 1.0 mm electro-galvanized steel sheet, coated with epoxy powder to prevent rust |
| Protection System | AC fuse for input short-circuit protection, DC fuse for charging and load protection, and low voltage cut-off circuit to extend battery life |
| Status Indicators | LED MAIN – shows input power status, LED CHARGE – shows charging status, LED BATT. FULL – shows battery readiness |
| Switch Button | Manual On/Off switch for emergency lamp operation only |
| Emergency Test | Test button for emergency lighting system |
| Weight | 4.4 kg |
Emergency Light (EML-SP 12-5)
Emergency Light EML-SP 12-5 features an automatic backup system that activates instantly during a power outage. The emergency light provides consistent illumination without dimming for up to 5 hours of operation. Equipped with energy-efficient LED bulbs, it uses a 2-stage charging system to extend battery life. The unit is powered by a sealed maintenance-free battery, eliminating the need for distilled water refills throughout its service life
Key Features – Emergency Light EML-SP 12-5
| Operating Condition | Provides emergency lighting only when the main power supply fails |
| Input Voltage | AC 220V 50Hz (standard household power) |
| Lamp | 2 × LED lamps, 7W each (constant brightness) |
| Battery | Sealed maintenance-free battery (no distilled water required) |
| Battery Capacity | 12V 5Ah |
| Operating Duration | 3 hours within the first 12 months, and 2 hours within 2 years |
| Charging System | Two-level charging system: Level 1 – Charges battery up to 14.4V, then reduces to Level 2 – 13.75V to maintain stable battery voltage |
| Current Limiting | Limits charging current to 450mA |
| Charging Time | 12 – 18 hours |
| Enclosure Material | Made of 1.0 mm electro-galvanized steel sheet, coated with epoxy powder to prevent rust |
| Protection System | AC fuse for input short-circuit protection, DC fuse for charging and load protection, and low voltage cut-off circuit to extend battery life |
| Status Indicators | LED MAIN – shows input power status, LED CHARGE – shows charging status, LED BATT. FULL – shows battery readiness |
| Switch Button | Manual On/Off switch for emergency lamp operation only |
| Emergency Test | Test button for emergency lighting system |
| Weight | 3.95 kg |